Spektrum DX6i - Manual (Page 10)

10 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
INSTAllING ThE TRANSMITTER bATTERIES
DX6i systems that are included in some Ready-To-Fly aircraft (like the E-flite Blade 400) require 4 AA batteries
while DX6i systems purchased separately include rechargeable NiMH batteries and an overnight charger.
INSTAllING ThE bATTERIES
For transmitters that require 4 AA batteries:
Remove the battery door and install 4 AA batteries, noting the polarity of each corresponds with the diagram in the
battery holder. Replace the battery door.
Note: Optional NiCd or NiMH 1.2 volt AA rechargeable batteries can also be used. A charge jack
is located on the left side of the transmitter for convenient recharging.