Spektrum DX6i - Manual (Page 63)

63 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Rotate the ROLLER to the right until D/R&EXPO is highlighted on screen.
Reduce photo to 13.5%
ADJUST LIST
2
MODEL SELECT
D/R&EXPO
TRAVEL ADJ
Main
Press the roller to access the Dual Rate and Expo function.
Reduce photo to 13.5%
D/R&EXPO
AILE 1 100% INH%
ELEV 1 100% INH%
RUDD 1 100% INH%
List
Move the respective D/R switch in the desired position (0 or 1) that you wish to change.
Rotate the roller to highlight the desired channel’s EXPO or D/R value that you wish to adjust.
Press the roller to access the D/R or EXPO value.
Rotate the roller to adjust the D/R or Expo value.
After the desired value is programmed press the roller to deselect the value.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE ADjUST lIST SCREEN
Rotate the roller to highlight LIST then press the roller.
The Dual Rate and Expo functions for aileron, elevator and rudder can be combined on a single switch
conveniently allowing high or low rates to be selected via one switch. The choices for this are found on the
COMBI SWITCH on page 46.