Spektrum DX6i - Manual (Page 36)

36 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
TO PROGRAM A MODEl NAME
Rotate the roller to highlight the block below the MODEL # shown on the screen then press the roller.
Reduce photo to 13.5%
MODEL NAME
MODEL 6
MUSTANG
List
Rotate the roller to select the desired position that you wish to assign a letter or number then press the roller to
access the numbers or letter characters.
Rotate the roller to scroll through the letters/ numbers and when the desired number is selected pressing the roller
will assign it to the selected position.
Repeat this process to complete the model name then highlight OK! When finished.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to the
SETUP LIST screen.