Adjust list – Spektrum DX6i User Manual
Page 68
68
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
FlAp
The Flap System allows the flap and elevator positions to be programmed for landing and takeoff. This is
accomplished by selecting values for the elevator and flaps to be activated when the Flap/ Gyro is engaged. Two
flap and elevator positions are available. Normal and Land.
To access the FLAPS function
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen, release the
roller.
Reduce photo to 13.5%
ADJUST LIST
MODEL SELECT
Main
Alternately the setup screen can be accessed from the main screen by pressing the roller to access the ADJUST
LIST list then scrolling through the ADJUST LIST using the roller to highlight SETUP LIST, then pressing the roller.
Reduce photo to 13.5%
ADJUST LIST
5
SUB TRIM
FLAPS
MIX 1
Main