Spektrum DX6i - Manual (Page 99)

99 SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
POwER SETTING
The power setting screen is used to place the transmitter in one of two power settings. A-EU 328 is appropriate
for most European countries conforming to EU 300-328, while B-US 247 should be selected for use in the United
States and outside the EU.
TO ENTER ThE POwER SETTING fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,
then scrolling through the ADJUST LIST by rolling the roller to highlight POWER SETTING, then press the roller to
access the POWER setting function.
Reduce photo to 13.5%
SETUP LIST
RANGE CHECK
POWER SETTING
CONTRAST
10
Main
Reduce photo to 13.5%
POWER SETTING
A-EU 328
List
Rotate the roller to highlight the power setting then press the roller. now rotate the roller to select A-EU 328 for EU
countries and or B-US247 if the system is to be used in the USA or non EU countries.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to the
SETUP LIST screen.