Vibration reduction, A193), A193) t – Nikon COOLPIX P500 User Manual

Page 207: A193) to, A193) is automa, A193) is enabled, A193) is ena, A193

Advertising
background image

193

Setup Menu

Basi

c Came

ra Setup

Vibration Reduction

Specify the vibration reduction setting for taking still pictures. Correct blur, caused
by slight hand movement known as camera shake, that commonly occurs when
shooting with zoom applied or at slow shutter speeds.
When the camera is stabilized for shooting with a tripod, set vibration reduction to
Off.

When vibration reduction is enabled, the current setting is displayed during
shooting (

A8, 29). When Off is selected, an icon for the current setting is not

displayed.

D

Compensating Movies with Electronic VR

To reduce the effects of camera shake when recording movies, enable Electronic VR (

A167) from

the movie menu (

A163).

Press the

d button M z (Setup menu) (A186) M Vibration reduction

V

On (hybrid)

Records with optical compensation for camera shake during still picture shooting
using the image sensor shift method, and under the following conditions, also
performs electronic VR using image enhancement.
When the flash does not fire
When the shutter speed is slower than 1/30 second (wide-angle position) and

1/250 second (telephoto position).

When the self-timer is off
When Single is selected for the continuous setting
When Off is selected for the Exposure bracketing setting
When the ISO sensitivity is 200 or less

g

On (default setting)

Compensates for camera shake during still picture shooting using the image sensor
shift method. The camera automatically detects the panning direction and only
corrects for vibration caused by camera shake.
When the camera is panned horizontally, for example, vibration reduction only
reduces vertical shake. If the camera is panned vertically, vibration reduction only
compensates for horizontal shake.

k

Off

Vibration reduction is not enabled.

Advertising