Nikon COOLPIX P500 User Manual

Page 52

Advertising
background image

38

Using the Flash

Bas

ic Ph

otography an

d Pl

ayba

ck

: A
(Auto)

M

o

de

B

Shooting When Lighting is Dim or When the Flash is Set to W (Off)

Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of

camera shake. When the camera is stabilized with a tripod, set Vibration reduction (

A193) to

Off in the setup menu (

A185).

E may be displayed in the shooting screen. When E is displayed, the ISO sensitivity has

increased automatically.

The noise reduction function may operate with some shooting conditions such as dim lighting.

When the noise reduction function operates, it may take more time to save images.

B

Note on Using the Flash

Reflections from dust particles in the air may appear as bright spots in pictures. To reduce these
reflections, set the flash to W (Off), or shoot pictures with the flash lowered.

C

Flash Indicator

The flash indicator shows the flash status when the shutter-release
button is pressed halfway down.
On:

Flash fires when picture is shot.

Blinks: Flash is charging. Wait a few seconds and try again.
Off:

Flash does not fire when picture is shot.

C

Red-eye Reduction

This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”).
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.
Additionally, if the camera detects red eye while saving an image, the affected area will be processed
to reduce red-eye before the image is saved.
Note the following when taking pictures:
Due to pre-flashes, there is a slight lag between when the shutter-release button is pressed and

when the picture is shot.

The time required to save the picture increases slightly.
Red-eye reduction may not produce the desired results in some situations.
In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye

reduction processing. In these cases, choose another mode and try again.

When Red-eye reduction (

A196) in the setup menu is set to Pre-flash off, the shutter is released

immediately when the shutter-release button is pressed all the way.

Advertising