Nikon COOLPIX P500 - Manual (Page 216)

202
Setup Menu
Basi
c Came
ra Setup
Charge by Computer
Choose whether or not the battery inserted into the camera is charged when the
camera is connected to a computer via the USB cable (
A178).
B
Notes on Connecting the Camera to a Printer
• The battery cannot be charged with connection to a printer, even if the printer complies with the
PictBridge standard.
• When Auto is selected for Charge by computer, it may be impossible to print images with direct
connection of the camera to some printers. If the PictBridge startup screen is not displayed on the
monitor after the camera is connected to a printer and turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the
printer.
Reset File Numbering
When Yes is selected, the sequential numbering of file numbers is reset ( A215).
After resetting, a new folder is created and the file number for the next image taken
starts from “0001.”
B
Notes on Reset file numbering
• Reset file numbering cannot be applied when scene mode is set to Panorama, or when Intvl
timer shooting is chosen for continuous in shooting mode j, k, l, m or M.
For Panorama assist or Intvl timer shooting, a new folder is created, and file numbers are
assigned automatically starting with “0001” (
A215, 216).
• Reset file numbering cannot be applied when the folder number reaches 999 and there are
images in the folder. Insert a new memory card, or format the internal memory/memory card
(
A200).
Press the d button M z (Setup menu) (A186) M Charge by computer
Auto (default setting)
When the camera is connected to a computer that is running, the battery inserted
into the camera is automatically charged using power supplied by the computer.
Off
The battery inserted into the camera is not charged when the camera is connected
to a computer.
Press the d button M z (Setup menu) (A186) M Reset file numbering