HID DTC1000/4000/4500 User Guide LINUX & MAC - Manual (Page 27)

© 2011 HID Global Corporation All rights reserved
Fargo DTC1000/DTC4000/DTC4500 CUPS Driver User Guide - LINUX (L001452, Rev 1.2) 27
Reviewing the Print Options
Command Line Usage CUPS option Description
Ribbon = YMCKOK Ribbon Type = YMCKOK Sets the Ribbon type for the
print job to YMCKOK – Full
Color/Two Resin Black/Overlay.
Ribbon = YMCFKO Ribbon Type = YMCFKO Sets the Ribbon type for the
print job to YMCFKO
– Full
Color/ Fluorescing/ Resin
Black/Overlay. Only available for
the DTC4500 and DTC4000.
Ribbon = YMCFKOK Ribbon Type =
YMCFKOK Sets the Ribbon type for the print
job to YMCFKOK
– Full Color/
Fluorescing/ Two Black/Overlay.
Only available for the DTC4500
and DTC4000.
Ribbon = KStandard Ribbon Type = Standard
Resin Sets the Ribbon type for the print
job to Standard Resin.
Ribbon = KPremium Ribbon Type = Premium
Resin Sets the Ribbon type for the print
job to Premium Resin.
Ribbon = MonoColor Ribbon Type = Colored
Resin Sets the Ribbon type for the print
job to mono color Resin. This
option should be used for any of
the colored resin Ribbons (Red,
Blue, Green, or White)
Ribbon = KO Ribbon Type = KO -
Premium Resin/Overlay Sets the Ribbon type for the print
job to KO
– Premium
Resin/Overlay.
Ribbon = BO Ribbon Type = BO -
Dye-Sub Black/Overlay Sets the Ribbon type for the print
job to BO
– Dye Sub Black with
Overlay
Ribbon = None Ribbon Type = None -
Re-Writable Sets the Ribbon type for the print
job to none. Used for rewriteable
cards.