HID DTC1000/4000/4500 User Guide LINUX & MAC - Manual (Page 28)

© 2011 HID Global Corporation All rights reserved
Fargo DTC1000/DTC4000/DTC4500 CUPS Driver User Guide - LINUX (L001452, Rev 1.2) 28
Reviewing the Print Options
Command Line Usage CUPS option Description
PrintBothSides = true/false Print Both Sides
= True/ False Allows dual printing capabilities if
the printer is equipped with a
flipper module.
SplitRibbon = true/false Split 1 Set of
Ribbon Panels =
True/ False By selecting true this option will
print full color on the front of the
card and resin black on the back
of the card. If using the YMCKO
ribbon type, the front will print
with YMC and the back with the
K panel, and the O panel printed
on the front.
PrintBackonFront = true/false Print Back
Image on Front
of Card = True/
False Allows printing back on front and
front on back.
PrintBackOnly = true/false Print Back Side
Only = True/
False Allows printing back side only.
RotateImageFront = true/false Rotate Front 180
Degrees = True/
False Allows rotating the front print.
RotateImageBack = true/false Rotate Back 180
Degrees = True/
False Allows rotating the back print.
DisablePrinting = true/false Disable Printing
(Feed Card
Only) = True/
False Allows disabling Printing, useful
to encode cards.
WriteOnly= true/false Write Only (No
erase pass) =
True/ False Allows write only. (For
rewriteable cards)