HID DTC1000/4000/4500 User Guide LINUX & MAC - Manual (Page 30)

© 2011 HID Global Corporation All rights reserved
Fargo DTC1000/DTC4000/DTC4500 CUPS Driver User Guide - LINUX (L001452, Rev 1.2) 30
Reviewing the Image Color Options
Command Line
Usage CUPS Option Description
ResinDither = Graphics Resin Dither =
Optimize for
Graphics
Select Optimize for Graphics when
printing barcodes and graphics with
resin.
ResinDither = Photos Resin Dither =
Optimize for Photos Select Optimize for Photo when
printing photo quality images with
resin.
DyeSubIntensity = <-50
to 50> Dye-Sub Intensity =
<-50 to 50> Dye-Sub intensity
– defaults to zero
and has a range from -50 to 50. This
is valid for YMC panels.
ResinHeatFront = <-50
to 50> Resin Heat Front = <-
50 to 50> Resin heat for the front of the card –
defaults to zero and has a range from
-50 to 50. Deals with K material only
ResinHeatBack = <-50
to 50> Resin Heat Back = <-
50 to 50> Resin heat for the back of the card –
defaults to zero and has a range from
-50 to 50. Deals with K material only.
OverlayHeat = <-50 to
50> Overlay Heat = <-50
to 50> Overlay heat
– defaults to zero and
has a range from -50 to 50. Deals with
O panel only.
EraseIntensity = <-50
to 50> Erase Intensity = <-
50 to 50> Erase Intensity - defaults to zero and
has a range from -50 to 50.
SharpnessOffset = <-
50 to 50> Sharpness = <-50 to
50> Image Quality: Sharpness – defaults
to zero with a range of -50 to 50.
ContrastOffset = <-50
to 50> Contrast = <-50 to
50> Image Quality: Contrast – defaults to
zero with a range of -50 to 50.
GammaOffset = <-50
to 50> Gamma = <-50 to
50> Image Quality: Gamma – defaults to
zero with a range of -50 to 50.
YellowBalance = <-50
to 50> Yellow Balance = <-
50 to 50> Yellow Balance – defaults to zero with
a range of -50 to 50.
MagentaBalance = <-
50 to 50> Magenta Balance =
<-50 to 50> Magenta Balance – defaults to zero
with a range of -50 to 50.
CyanBalance = <-50 to
50> Cyan Balance = <-50
to 50> Cyan Balance – defaults to zero with
a range of -50 to 50.