Reviewing the image position options – HID DTC1000/4000/4500 User Guide LINUX & MAC User Manual
Page 31
© 2011 HID Global Corporation
All rights reserved
Fargo DTC1000/DTC4000/DTC4500 CUPS Driver User Guide - LINUX (L001452, Rev 1.2)
31
Reviewing the Image Position Options
Command Line Usage
CUPS option
Description
ImageVOffset = <-100 to
100>
Vertical Offset = <-
100 to 100>
Use the Vertical adjustment to move
the image toward the front of the
Printer (if a positive number is
entered) and toward the rear of the
Printer (if a negative number is
entered).
Range is from -100 to 100.
ImageHOffset = <-100 to
100>
Horizontal Offset = <-
100 to 100>
Use the Horizontal adjustment to
move the image toward the card
output side of the Printer (if a
positive number is entered) and
toward the card input side of the
Printer (if a negative number is
entered). Range is from -100 to 100.
(Note: Adjusting the Horizontal
offset may result in ribbon breaking.)