Alliance Laundry Systems Stacked Clothes Dryer - Manual (Page 18)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
510975 16
Step 4: (Electric Dryer Only) Connect
Electrical Plug
For further assistance, refer to section on Electrical
Requirements.
IMPORTANT: Use only a new U.L. listed No. 10
(copper wire only) three conductor power supply
cord kit rated 240 Volts (minimum), 30 Amperes
and labeled as suitable for use in a clothes dryer.
NOTE: For more detailed information on
connecting three-wire or four-wire plugs, refer to
section on Electrical Connection.
Four-wire cord is required for mobile homes or
where codes do not permit grounding through
neutral.
Figure 8
D275I D006I
1 Typical Receptacle 3 Strain Relief Nut
2 Power Cord 4 Strain Relief
1
2
4
2
3
4
THREE-WIRE
1
FOUR-WIRE
3