Sony HMD-A200 - Manual (Page 5)

5
US
Sony HMD-A100/A200 (US,FR,ES) 3-867-863-11 (1)
Identifying parts and controls
See the pages in parentheses for further details. (Model HMD-
A200 is used for illustration purposes.)
1 1 1 1 Control button (page 9)
The control button is used to display the menu and make
adjustments to the monitor, including brightness and contrast
adjustments.
2 2 2 2 1 (power) switch and indicator (pages 6, 13, 16)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and either
flashes in green and orange, or lights up in orange when the
monitor is in power saving mode.
3 3 3 3 AC IN connector (page 6)
This connector provides AC power to the monitor.
4 4 4 4 Video input connector (HD15) (page 6)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
* DDC (Display Data Channel) is a standard of VESA.
5 5 5 5 USB (universal serial bus) downstream connectors
(page 7)
Use these connectors to link USB peripheral devices to the
monitor.
6 6 6 6 USB (universal serial bus) upstream connector
(page 7)
Use this connector to link the monitor to a USB compliant
computer.
MENU
AC IN
Rear Front
Pin No. Signal
1 Red
2 Green
(Composite Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 –
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
1 2 3 4 5
8 7 6
11 12 13 14 15
10 9
01US01COV-UC.book Page 5 Monday, June 14, 1999 2:40 PM