Sony PCGA-DVD51 - Manual (Page 10)

10
7
Ensure that “Floppy disk drive” is checked and the
supplied floppy disk is inserted in the floppy disk
drive. Then, click [Next].
8
Wait until the search is complete and the window
changes.
9
Click [Next].
Copying starts.
Wait until copying is finished and the window
changes.
10
Click [Finish].
The driver installation is finished.
In step 11, confirm the installation.
11
Click the [Start] button, point to [Settings], and
then click [Control Panel].
12
Double-click [PC card].
[PC card (PCMCIA)] opens.
If “Sony CardBus ATAPI-Socket 1” appears on the
list, the driver is installed correctly.
If you use any of the following models, follow
the steps below to complete the installation
PCG-505GX, 505G, 505FX, 505F, 505TX, 505TS, 505TR,
C1X
Remove the connected PC card and keep the supplied
installation disk in the floppy disk drive.
1
Click the [Start] button, point to [Settings], and
then click [Control Panel].
2
Double-click [Add New Hardware].
The “Add New Hardware Wizard” window appears.
3
Click [Next].
4
Click [Next].
Wait until the search is completed and the screen
display changes.
5
Select “No” and click [Next].
Setting up the DVD-ROM drive (continued)