Sony PCGA-DVD51 - Manual (Page 12)

12
Installing the driver (Windows R 2000
Professional)
1
Connect the floppy disk drive to the computer.
If you use a USB floppy disk drive, it can be
connected after the computer has been turned on.
2
Turn on the computer.
Do not attempt to operate the computer until
Windows is functioning.
3
Insert the supplied installation disk in the floppy
disk drive.
4
Connect the AC adapter included in the package,
to the DVD-ROM drive and an AC outlet, and then
insert the PC card into the PC card slot on the
notebook computer.
For details, see “Connecting the DVD-ROM drive
to the notebook computer” on page 13.
The “Add New Hardware Wizard” dialog box
appears.
5
Click [Next].
6
Ensure that “Search for the most appropriate
driver for using a device (Recommendation)” is
selected and then click [Next].
7
Ensure that “Floppy disk drive” is checked and the
supplied floppy disk is inserted in the floppy disk
drive. Then, click [Next].
If the “CD-ROM drive“ is checked, remove the check.
8
Wait until the search is complete and the window
changes.
9
Click [Next].
10
Click [Finish].
The driver installation is complete.
In step 11, confirm the installation.
11
Double-click the icon in the taskbar on the
right side of the display.
[Unplug or Eject Hardware] appears.
If [Sony CardBus ATAPI] in the [Hardware
Devices] list, the installation is finished correctly.
Click [Close] to close the window.
Setting up the DVD-ROM drive (continued)
Tip
When the
icon does
not appear on the taskbar,
see the tip on page 16 to
display it.