Error displays/messages, 25 error displays/messages – Sony CDX-M800 User Manual

Page 25

Advertising
background image

25

Error displays/Messages

Automatic tuning is not possible.

• The local seek mode is set to “on.”

t Set the local seek mode to “off” (page

18).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set to the monaural reception mode (page

18).

A program broadcast in stereo is heard in
monaural.

• The unit is in monaural reception mode.

t Cancel monaural reception mode (page

18).

Interference occurs during FM reception.

The wide mode is selected.
t Set the IF mode to “IF Auto” (page 18).

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about 5
seconds, and an alarm sound will be heard.

Blank

*

1

No tracks have been recorded on an MD*

2

.

t Play an MD with recorded tracks on it.

Error

*

1

• A CD is dirty or inserted upside down*

2

.

t Clean or insert the CD correctly.

• A CD/MD cannot play because of some

problem*

2

.

t Insert another CD/MD.

Failure

*

3

The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this

model to check the connection.

FAILURE

*

3

When the XM tuner is connected, storing an
XM radio channel into a preset failed.
t Be sure to receive the channel that you

want to store, then try it again.

High Temp

The ambient temperature is more than 50°C
(122°F).
t Wait until the temperature goes down

below 50°C (122°F).

NO Disc

*

1

No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.

NO Magazine

The disc magazine is not inserted in the CD/
MD unit.
t Insert the magazine in the CD/MD unit.

NO Music

*

2

A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD

unit.

Not Ready

The lid of the MD unit is open or the MDs are
not inserted properly.
t Close the lid or insert the MDs properly.

Offset

There may be an internal malfunction.
t Check the connection. If the error

indication remains on in the display,
consult your nearest Sony dealer.

continue to next page

t

Advertising
This manual is related to the following products: