Printer rear panel, Printer left side panel – Sony DPP-FP97 User Manual

Page 8

Advertising
background image

8

GB

Printer rear panel

A Handle

As illustrated below, raise the handle when
you carry the printer.
When you use the printer, close the handle to
its original position.

Notes

• When you carry the printer, make sure to

remove memory cards, external devices,
the paper tray, AC adaptor, and other
cables. Otherwise malfunctions may occur.

• Set the LCD panel to its original position.

B Ventilation holes
C Paper outlet
D DC IN 24 V jack (.page 12)

Plug the supplied AC adaptor into this
connector. Then connect the AC adaptor and
AC outlet with the power cord.

Printer left side panel

E HDMI OUT (output) connector

(

.page 45)

When using the printer with a High-definition
television, connect an HDMI cable into this
connector.

F USB connector (.page 54)

When using the printer in PC mode, connect a
USB cable to this connector.

G PictBridge/EXT INTERFACE

connector (

.pages 48 to 50)

When using a PictBridge-compliant digital
camera, a mass storage device such as a USB
memory or photo storage device, a Bluetooth
USB adaptor (DPPA-BT1*), or other external
USB device, connect it via this connector.

* In some regions, the

DPPA-BT1

Bluetooth

USB adaptor is not sold.

Advertising