Sony MXD-D400 - Manual (Page 23)

M
D
– R
e
cor
d
ing
23 GB
3
Press REC MODE repeatedly to select
the recording mode.
Select the desired recording time.
*Maximum recording time using a 60-minute
MD.
4
Press z .
The MD deck stands by for recording.
5
Start playing the desired source to
record.
6
Press T.REC at the desired point to
start recording.
To stop Time Machine Recording
Press x.
Note
The MD deck starts storing audio data when the deck
stands by for recording in step 4 and you start playing
the source. If less than 6 seconds have passed when you
press T.REC (or AMS), Time Machine Recording
starts with less than 6 seconds of audio data.
Tip
For details about LP2/LP4 recording, see “Recording
for long times” on page 29.
After recording
Use the Divide Function (page 40).
At any point during recording
— Track Mark
You can mark track numbers during manual
recording of any source.
Press z during manual recording at the
point you want to add a track mark.
Presetting to automatically
mark track numbers before
recording
— Level-Synchro Recording
The Level Synchro Recording Function is
factory set to on, so the track numbers are
automatically marked. Track numbers are
automatically marked when the input signal is
continuously below a certain level for more than
two seconds and then exceeds that level. If
“L
.
SYNC” does not appear during recording,
turn on the Level Synchro Recording as follows.
To record in Select Recording time*
Stereo Blank (No
indicator) 60 minutes
LP2 Stereo LP2 120 minutes
LP4 Stereo LP4 240 minutes
Monaural MONO 120 minutes
Marking track numbers
2,5
3,4
3,4
1
continued