Sony MXD-D400 - Manual (Page 25)

M
D
– R
e
cor
d
ing
25 GB
1
Set to MD in CD MD select switch.
2
Press MENU/NO repeatedly until
“Setup Menu” appears.
3
Press . or > repeatedly (or turn
AMS) until “S.Space Off” appears, then
press YES (or AMS).
4
Press . or > repeatedly (or turn
AMS) until “S.Space On” appears, then
press YES (or AMS).
5
Press MENU/NO.
To continue recording, follow the
procedures described for each type of
recording.
To turn off the Smart Space
Function
In step 3, press . or > repeatedly (or turn
AMS) until “S.Space On” appears, then press
YES (or AMS).
In step 4, press . or > repeatedly (or turn
AMS) until “S.Space Off” appears, then press
YES (or AMS).
When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when making
an analog recording, but also when making a
digital recording from a CD, etc.
Adjusting the analog recording level can be
performed using the buttons on the deck only.
Adjusting the recording level
when making an analog
recording
1
Press INPUT repeatedly until
“ANALOG” appears.
2
Press REC z .
The MD deck stands by for recording.
3
Start playing the desired source to
record.
4
Turn REC LEVEL on the deck to adjust
the recording level.
Adjust to the optimum level while making
sure that “OVER” does not appear in the
display at the loudest portion.
2,5
1
3,4
3,4
Adjusting the recording
level
1 4
2
ANALOG
Adjust the level so as not
to light up “OVER”.
continued