Sony MXD-D400 - Manual (Page 45)

T
rou
b
les
hootin
g
45 GB
One of the following messages may appear or
flash in the display during operation.
Blank Disc
The inserted recordable MD is new, or all tracks on
the MD have been erased.
Cannot Copy
An attempt was made to make a second copy from a
digitally dubbed MD (page 47).
Cannot Edit
• You tried to edit in Program or Shuffle Play mode.
• The track is recorded in MDLP mode.
• The MD is record-protected.
CD Error!
An operational error has occurred in the CD player
section. Wait a few seconds, and then try the
operation again.
Disc Full!
The MD is full (see System Limitations on page 47).
Edit NOW
You pressed ?/1 while in S.F Edit (changing the
recording level after recording, Fade-in, Fade-out)
mode.
If you turn off the deck while in S.F Edit mode, any
changes that you have made will not be made
properly. Finish the changes and leave S.F Edit
mode before turning off the deck.
Impossible
You tried to make an impossible editing operation
(page 30).
Incomplete!
Adjustment of the recording level after recording or
Fade-in and Fade-out procedures have failed since
the deck was either subject to vibration or there is a
damaged or dirty disc in the tray.
Initialize (flashing when you turn on the deck)
The power was off for a long time, so the deck is
initializing itself.
Name Full!
The title capacity of the MD has reached its limit
(about 1,700 characters).
No Change
While attempting to change the recording level after
recording, you pressed YES (or AMS) without
actually changing the recording level, so no change
was made.
—No Disc—
There is no disc in the MD deck, or no disc in the
CD player.
No Name
The disc or track has not been labeled.
Premastered
An attempt was made to record on the premastered
MD.
Retry
The deck is retrying reading data from the CD
during High-Speed CD-MD Synchro Recording
(page 29).
Step Full!
You tried to program more tracks (steps).
TrProtected
Tracks and other data that have been checked out on
Net MD equipment are protected, so you cannot use
some of the MD editing functions.
Messages