Sony MXD-D400 - Manual (Page 30)

30 GB
Before you start editing
You can edit an MD only when:
• The MD is recordable.
• The MD play mode is Normal Play.
Check the following, before editing.
1
Check the tab of the MD to be edited.
Slide the tab to close the slot.
If the MD is protected, you cannot edit the
MD.
2
Press PLAY MODE repeatedly until
both “SHUFFLE” and “PROGRAM”
disappear.
You can edit the MD only in Normal Play
mode. You cannot edit the MD in Shuffle or
Program Play mode.
To quit while editing
Press MENU/NO.
Operation buttons for Editing
After editing
Press EJECT to remove the MD or press ?/
1 (power) to turn off the deck.
“TOC” starts flashing. The TOC is updated and
editing is completed.
Before pulling out the mains lead
MD editing is completed when the MD Table of
Contents (TOC) is updated. The TOC is updated
when you eject the MD or press
?/1 to turn off
the deck. Do not pull out the mains lead before
updating the TOC or while updating the TOC
(while “TOC” lights up or flashes) to ensure a
complete editing.
MD – Editing
Editing tips
MENU/NO
./>
YES