Sony MXD-D400 - Manual (Page 24)

24 GB
1
Set to MD in CD MD select switch.
2
Press MENU/NO repeatedly until
“Setup Menu” appears.
3
Press . or > repeatedly (or turn
AMS) until “T.Mark” appears, then
press YES (or AMS).
4
Press . or > repeatedly (or turn
AMS) until “T.Mark LSync” appears,
then press YES (or AMS).
“L.SYNC” lights up.
5
Press MENU/NO.
To continue recording, follow the
procedures described for each type of
recording.
Other operations
* When the recording source is tape or radio program
and the track numbers are not marked properly
because of noise, set this level higher so that track
numbers are marked easily. The factory setting is
“–50 dB”.
Notes
• Track numbers are not marked depending on the
track.
• When recording a CD, track numbers are marked
where you paused recording. In addition, the tracks
might be recorded as the same single track with a
single track number when the same single track of
the same CD is recorded repeatedly.
Smart Space: Lets you make the blank spaces
between tracks 3 seconds long automatically
while making a digital recording from a CD. For
other types of recording, if the Smart Space
Function is on and there is no sound input for
about 3 seconds or more (but less than
30 seconds) while recording, the MD deck
replaces this silence with a blank of about
3 seconds and continues recording.
The Smart Space Function is factory set to on.
Auto Cut: When the Smart Space Function is
on, if there is no sound input for 30 seconds or
more, the MD deck replaces this silence with a
blank of about 3 seconds and enters recording
pause.
To Do this
Turn off the Level
Synchro Recording
Function In step 4, press . or >
repeatedly (or turn AMS) until
“T.Mark Off” appears, then
press YES (or AMS).
Change the trigger
lever for Level
Synchro
Recording* After step 2, press . or >
repeatedly (or turn AMS) until
“LS(T)” appears, then press
YES (or AMS). Press . or
> repeatedly (or turn AMS)
to select the level between –72
dB and 0 dB (in 2 dB steps),
press YES (or AMS), then press
MENU/NO.
Making a space between
tracks 3 seconds long
automatically
— Smart Space
No sound input for less than 30 seconds
Replaced with a blank of 3 seconds and
recording continues
Off
On
No sound input for 30 seconds or more
Replaced with a blank of 3 seconds and
recording pauses
Off
On