Sony DCR-TRV140 - Manual (Page 108)

108
Changing the menu settings
Icon/item
* 1) HiFi SOUND
AUDIO MIX
* 2) EDIT
TBC
TBC stands for “Time Base Corrector.”
DNR
DNR stands for “Digital Noise Reduction.”
ST1 ST2
Mode
z STEREO
1
2
—––
z OFF
ON
z ON
OFF
z ON
OFF
Meaning
To play back a stereo tape or dual sound track
tape with main and sub sound.
To play back a stereo tape with the left sound
or a dual sound track tape with main sound.
To play back a stereo tape with the right sound
or a dual sound track tape with sub sound.
To adjust the balance between stereo 1 and
stereo 2.
—
To minimize picture deterioration when editing.
To correct jitter.
To not correct jitter. Set TBC to OFF when playing
back a tape on which you have dubbed over and
recorded the signal of a TV game or similar
machine.
To reduce picture noise.
To reduce a conspicuous afterimage when the
picture has a lot of movement.
POWER
switch
VCR
VCR
PLAYER
PLAYER
PLAYER
Note on AUDIO MIX (DCR-TRV140 only)
When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
In more than 5 minutes after removing the power source (CCD-TRV107/TRV108/
TRV308/TRV408/TRV608 only)
The “EDIT” item is returned to their default settings.
The other menu items are held in memory even when the battery is removed.
* 1) DCR-TRV140 only
* 2) CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only