Sony DCR-TRV140 - Manual (Page 56)

56
Frame by frame recording – Cut recording
– DCR-TRV140 only
You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 6.
(1) In CAMERA mode, press MENU to display the menu.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Press MENU to erase the menu display.
The FRAM REC indicator lights up.
(6) Press START/STOP to start cut recording. The camcorder makes a recording
for about six frames, and returns to recording standby.
(7) Move the subject, and repeat step 6.
To cancel the cut recording
Set FRAME REC to OFF in the menu settings.
Notes on cut recording
•The last recorded cut is longer than other cuts.
•The proper remaining tape time is not indicated if you use this function continuously.
When you set the POWER switch to OFF (CHG)
The cut recording function is automatically canceled.
FRAME REC
3
MENU
5
[ ME NU ] : E ND
C A M E R A S E T
D Z O O M
1 6 : 9 W I D E
S T E A D Y S H O T
N . S . L I G H T
F R A M E R E C
I N T . R E C
R E T U R N
O F F
O N