Changing the menu settings – Sony DCR-TRV140 User Manual
Page 112
112
In more than 5 minutes after removing the power source
The AUDIO MIX*
1)
, COMMANDER*
3)
and HiFi SOUND*
1)
items are returned to their
default settings.
The other menu items are held in memory even when the battery is removed.
Recording a close-up picture
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
*
1)
DCR-TRV140 only
*
2)
CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only
*
3)
CCD-TRV107/TRV408, DCR-TRV140 only
*
4)
CCD-TRV107/TRV408 only
Changing the menu settings
Icon/item
WORLD TIME
BEEP
DISPLAY
REC LAMP
VIDEO EDIT*
1)
COMMANDER*
3)
POWER
switch
CAMERA
VCR*
1)
/
PLAYER*
2)
CAMERA
VCR*
1)
/
PLAYER*
4)
CAMERA
VCR*
1)
/
PLAYER*
2)
CAMERA
CAMERA
VCR
Mode
—––
z
MELODY
NORMAL
OFF
z
ON
OFF
z
LCD
V-OUT/LCD
z
ON
OFF
——
Meaning
To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set the time
difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the
originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
To output the beep instead of the melody.
To cancel the melody and beep sound.
To activate the Remote Commander supplied
with your camcorder.
To deactivate the Remote Commander to avoid
unintentional operation caused by other VCR’s
remote control.
To show the display on the LCD screen and in
the viewfinder.
To show the display on the TV screen, LCD
screen, and in the viewfinder.
To light up the camera recording lamp at the
front of your camcorder when recording.
To turn the camera recording lamp off so that
the subject is not aware of the recording.
To make programs and perform video editing.
(p. 83)