Sony DCR-TRV140 - Manual (Page 73)

73
Editing
DCR-TRV140
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
To prevent deterioration of pictures when dubbing
(CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only)
Set EDIT to ON in the menu settings before dubbing.
You can edit on VCRs that support the following systems:
8 mm , Hi8
, Digital8 , VHS , S-VHS , VHSC , S-VHSC ,
Betamax , ED Betamax , mini DV , or DV
If your VCR is a monaural type (DCR-TRV140 only)
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the TV. If you connect the white plug,
the sound is L (left) signal. If you connect the red plug, the sound is R (right) signal.
If your VCR is a stereo type (CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only)
Connect the audio plug of the A/V connecting cable supplied to the left (white) input
jack of your VCR.
If your VCR has an S video jack
Connect using an S video cable (optional) to obtain optimum quality screen images.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR.
Dubbing a tape
S VIDEO OUT
A / V OUT
S VIDEO
VIDEO
AUDIO
IN
White
Red
Yellow
: Signal flow
A/V connecting cable
(supplied)