Sony DCR-TRV140 - Manual (Page 36)

36
Various playback modes
To operate video control buttons, set the POWER switch to VCR* 1) /PLAYER* 2) .
To view a still image (playback pause)
Press X during playback. To resume playback, press X or N.
To advance the tape
Press M in the stop mode. To resume normal playback, press N.
To rewind the tape
Press m in the stop mode. To resume normal playback, press N.
To change the playback direction (DCR-TRV140 only)
Press on the Remote Commander during playback to reverse the playback direction.
To resume normal playback, press N.
To locate a scene monitoring the picture (picture search)
Keep pressing m or M during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing m while rewinding or M while advancing the tape. To resume
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback) (CCD-TRV107/
TRV408, DCR-TRV140 only)
Press y on the Remote Commander during playback.
For slow playback in the reverse direction, press
, then press y on the Remote
Commander.* 1) To resume normal playback, press N.
To view the picture at double speed (DCR-TRV140 only)
Press
×
2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press , then press
×
2 on the Remote Commander. To resume
normal playback, press N.
To view the picture frame-by-frame (DCR-TRV140 only)
Press C on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press c. To resume normal playback, press N.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last 5 seconds of the recorded section are
played back and the playback stops.
Playing back a tape