Using the fader function – Sony DCR-TRV140 User Manual
Page 44
44
Using the fader function
(1) When fading in [a]
In the standby mode, press FADER until the desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
The last selected fader mode is indicated first of all.
(2) Press START/STOP. The fader indicator stops flashing.
After the fade in/out is carried out, your camcorder automatically returns to
the normal mode.
To cancel the fader function
Before pressing START/STOP, press FADER until the indicator disappears.
*
1)
CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only
*
2)
Fade in only
*
3)
DCR-TRV140 only
1
FADER
FADER
t FADER t M.FADER t STRIPE*
1)
t BOUNCE*
2)
t MONOTONE
no indicator
T DOT*
2)
*
3)
T WIPE*
2)
*
3)
T OVERLAP*
2)
*
3)
T