Sony DCR-TRV140 - Manual (Page 93)

93
Editing
– DCR-TRV140 only
You can record a tape from a VCR that has DV outputs. Use your camcorder as a
recorder.
Simply connect the i.LINK cable (DV connecting cable) (optional) to
DV IN/OUT and to DV OUT of the DV products. With digital-to-digital connection,
video and audio signals are transmitted in digital form for high-quality editing.
You cannot take a picture in when you connect your camcorder with other than the
i.LINK cable (DV connecting cable).
Before operation
Set DISPLAY to LCD in the menu settings (the default setting is LCD). Only SP mode is
available.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
and insert the recorded tape into the VCR.
(2) Set the POWER switch to VCR on your camcorder.
(3) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(4) Press N on the VCR to start playback.
The picture from a TV or VCR appears on the screen.
(5) Press X on your camcorder at the scene where you want to start recording from.
S VIDEO LANC DV
3,4,5
STOP REW PLAY FF PAUSE REC
DV OUT
DV IN/OUT
: Signal flow
i.LINK cable
(DV connecting cable) (optional)
Recording from video
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.