AT&T E1814B - Manual (Page 15)

12
Telephone operation
Settings
Selectalbe ringer melodies
1. Press MENU/SEL
to begin programming.
2. Press CID or DIR until the screen displays
RINGER: and the current setting.
3. Use MENU/SEL to change the current setting.
4. Press
CID
or
DIR
to display 1, 2, 3, 4 or OFF.
You will hear a sample of each ringer sound.
5. Press MENU/SEL to choose displayed ringer
sound and exit.
NOTE: If you choose OFF, the cordless handset ringer will
be turned off, and the screen will display RINGER OFF and
when the cordless handset is idle (not in use). If there are any
un-reviewed calls, the screen will display XX MISSED CALLS
and instead of RINGER OFF and .
Set cordless handset display date and time
1. Press MENU/SEL
to begin programming.
2. Press
CID
or
DIR
until the screen displays
DATE/TIME .
3. Press MENU/SEL to view or set date and time.
4. Press
CID or DIR to change the month in the
date and time line at the bottom of the display,
then press MENU/SEL.
5. Repeat step four to set day, hour, minute, and
AM/PM.
6. Press MENU/SEL to save selection and exit.
RINGER: 1
DATE/TIME
10:08 02/14
NOTES:
You can choose to set the
time manually, or you can
allow it to be set automatically
with incoming caller ID infor-
mation. The time will be set
automatically only if you sub-
scribe to caller ID service pro-
vided by your local telephone
company (page 27). The date
and time for the answering
machine need to be set sepa-
rately (page 34).
Caller ID will not set the year.
See page 34 for instructions
on how to set the year.
1.
2.