AT&T E1814B - Manual (Page 40)

37
Answering system operation
Message playback
Press
PLAY/ STOP
to listen to messages. The
system announces the number of messages, then
begins playback.
If you have new messages waiting, you will hear
only the new messages (oldest first). If there are
no new messages, the system will playback all
messages (oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and
time it was received.
• After the last message, you will hear “End of mes-
sages.” If the system has less than five minutes
of recording time left, you will hear the time
remaining.
Options during playback
• Press VOLUME
button to adjust the speaker
volume.
• Press SKIP to skip to next message.
• Press REPEAT to repeat the message cur-
rently playing. Press twice to hear previous
message.
• Press DELETE to delete the message being
played back.
• Press
PLAY
/STOP to stop playback.
To delete all messages
To delete all old messages, press and hold DELETE
while the telephone is idle (not during a call, or
during message playback).
1.
“You have [xx] new
messages and [xx]
old messages”
Number of messages (or during
playback, message number cur-
rently playing).
Message playback begins.
See options at right.
2.
PLAY/
STOP
to begin
or end message playback.
PLAY/
STOP
PLAY
/STOP
to end message playback.
NOTES:
1. If F is flashing in the mes-
sage window, memory
is full. You will have to
delete some messages
before new ones can be
received.
2. The maximum record time
is 15 minutes.
3. If you receive calls when
the memory is full, the
telephone will ring 10
times, then answer and
announce “Memory is
full, enter remote access
code.”
4. New (unheard) messages
cannot be deleted.