ARRI WRC-1 - Manual (Page 119)

119
• Press the MODE button to go to the next submenu.
To define the adjustment range for the mirror shutter
angle, use the SEL and SET buttons and the handwheel,
as described above.
One of the two limit values (minimum or maximum
shutter angle, depending on the adjustment direction
of the camera speed) can be defined; the other limit
value is automatically calculated by the WRC-1.
Press the SEL button for longer than 2 seconds.
Depending on the definable limit value, the shutter
angle display flashes in the first or second display line.
This can now be set using the handwheel.
The automatically calculated other limit value is shown
in the other display line. Press the SEL button again to
switch to the next digit. The selected shutter angle is
confirmed and the decimal is set to ‘0’ by pressing the
SET button.
The minimum shutter angle corresponds to the selected
minimum camera speed.
• Press the MODE button to go back to the main menu.
Controlling the Camera Speed