ARRI WRC-1 - Manual (Page 21)

21
• Connect the CCU socket on the camera with the CCU
socket on the UMC-1 using the UC-R1 cable.
• Select the same radio channel on the UMC-1 as is set
on the WMU-1 ➪ photo (see LCS Instruction Manual,
chapter 5.1.2.1). If several lenses are to be remotely
controlled independently of each other, the radio
channels 0 and 5, 1 and 6, and 3 and 7 can not be
used simultaneously.
Due to local telecommunications regulations for
the 2.4 GHz band only certain channels are
available sometimes. Only allowed radio
channels must be used.
Switch setting Countries
0 USA, Canada, Mexico, New Zealand, Europe
except France and Spain
1 USA, Canada, Mexico, New Zealand, Europe
except France and Spain
2 Europe except Spain
3 USA, Canada, Mexico, New Zealand, France
4 Japan
5 Australia
6 Australia
7 Spain
8,9 see switch setting 0
• Switch on the UMC-1 using the ON/OFF switch ➪ photo .
ON/OFF switch
radio channel
ON/OFF switch
radio channel
IRIS socket
Setup