ARRI WRC-1 - Manual (Page 78)

78
fps
<)
comp. off
5.6.1 Shutter angle /
compensation off
The mirror shutter angle can be manually adjusted within
the pre-defined end-stops of the handwheel.
Differences in exposure are not automatically
compensated for.
The main menu shows the currently adjusted mirror shutter
angle in the first display line, and ‘ANGLE’ in the second line.
Note The following warnings may be displayed:
‘IRIS TBL’ – a valid iris table has not yet been
activated;
readings with ‘NO’ in the first display line
indicate that the selected function is currently
not available (example: ‘NO IRIS’ although the
iris control is activated on the WRC-1, the iris
motor has not yet been connected);
readings with ‘RANGE’ in the second display
line indicate that the adjustment range of a
parameter has been exceeded (example: the
selected speed is not available with this camera);
readings with ‘OFF’ in the first display line
indicate that this function is deactivated on the
camera (example: shutter angle of the 435 is
Controlling the Shutter Angle