ARRI WRC-1 - Manual (Page 57)

57
• Press the MODE button to go to the next submenu.
The limit values for the shutter angle can be defined:
The shutter angle is automatically adjusted to compen-
sate the exposure while the iris is adjusted with the
handwheel. One of the two limit values (minimum or
maximum shutter angle, depending on the adjustment
direction of the iris) can be defined; the other limit
value is automatically calculated by the WRC-1.
• Press the SEL button for longer than 2 seconds.
Depending on the definable limit value, the first digits
flash in the first or second display line.
These can now be adjusted using the handwheel.
The automatically calculated other limit value is shown
in the other display line.
Press the SEL button again to switch to the next digit.
The first digits are confirmed, and the decimal is set to
‘0’, by pressing the SET button.
The minimum shutter angle corresponds to the selected
maximum aperture (smallest T-stop number).
• Press the MODE button to go to the next submenu.
The fixed value for the camera speed is defined using
the SEL and SET buttons and the handwheel.
• Press the MODE button to enter the next submenu. The
table menu has already been described under 5.5.1.
• Press the MODE button to go back to the main menu.
Controlling the Iris