ARRI WRC-1 - Manual (Page 164)

164
The connected camera is in the program mode;
the program activated in the camera has priority.
The camera program must be deactivated if the WRC-1 is
to be used for controlling (see Camera instruction manual).
A single frame unit is attached to the camera.
The single frame unit controls the mirror shutter and the
camera speed.
The single frame unit must be deactivated if the WRC-1
is to be used for controlling.
(see Single Frame/Capping Shutter instruction manual).
An ESU-1 or VSU is connected to the camera.
These units control the corresponding camera functions.
The ESU-1 or VSU must be disconnected from the
camera if the WRC-1 is to be used for controlling.
Warning: risk of improper use!
A SCU is connected to the camera.
This unit controls the corresponding camera functions.
The SCU must be disconnected from the camera if the
WRC-1 is to be used for controlling.
Warning: risk of improper use!
W
a
rnings