Konica Minolta QMS magicolor CX Reference - Manual (Page 42)

Administration
Menu
QMS magicolor CX Reference Guide 1-34
Emulations
Optional emulations appear only if installed.
» Note: To choose an emulation or ESP for a particular interface, use
the appropriate interface menu in the Administration/Communications
menu.
ESP Default Emulation
The emulation sensing processor (ESP) feature of the printer
analyzes incoming print jobs and identifies which emulation the
printer will use. The ESP Default Emul sets the ESP default
emulation used when ESP is unable to identify the language of a
print job. This allows the system administrator to select alternate
default emulations.
Menu
Administration
Emulations
ESP Default Emul
Choices
HPGL, Lineprinter, PostScript, PCL 5C (default)
Notes: You must turn the printer off and back on again for the change to
take effect. For more information on ESP, see chapter 3, “Technical
Specifications.”