Konica Minolta QMS magicolor CX Reference - Manual (Page 60)

Administration
Menu
QMS magicolor CX Reference Guide 1-52
Printer Start-Up Options
Trailer Page Inputbin
You can select the input bin (tray or cassette) from which the printer pulls
media when printing the trailer page.
Menu
Administration
Special Pages
Trailer Inputbin
Choices
Upper (default)—Pull trailer page media from the
upper input bin.
Lower—Pull trailer page media from the lower
input bin.
Notes: If you used the Administration/Engine/Inputbin x Name options to
change the names of the inputbins, these names replace Upper and
Lower in the message window.
Start-Up Page
By default, the printer prints a start-up page when you turn it on.
You can turn the start-up page off to conserve paper and toner.
Menu
Administration
Startup Options
Do Start Page
Choices
Yes (default)—Print a start-up page each time the
printer is turned on.
No—Don’t print a start-up page each time the
printer is turned on.
Notes: If you used the Administration/Engine/Inputbin x Name options to
change the names of the input bins, these names replace Multipurpose,
Lower, and Optional in the message window.
Error Handler
Error Handler is a diagnostic tool that identifies PostScript errors
encountered during a print job.
Menu
Administration
Startup Options
Do Error Handler
Choices
Yes—Load the Error Handler.
No (default)—Don’t load the Error Handler.
Notes: The printer must be rebooted for this option to take effect. Refer to
the
PostScript Language Reference Manual (Adobe Systems
Incorporated, Reading, PA: Addison-Wesley, 1990, ISBN 0-201-18127-4)
for more information on PostScript errors.