Konica Minolta QMS magicolor CX Reference - Manual (Page 36)

Administration
Menu
QMS magicolor CX Reference Guide 1-28
Min K Spool
Sets the minimum number of kilobytes of system memory
allocated to the parallel interface.
Menu
Administration
Communications
Parallel
Min K Spool
Choices
00000-99999
00015 (default)
Notes: This value must be less than K Mem For Spool.
A 00000 value does not turn off the spooling buffer for the parallel
interface. If the value is set to 00000, the printer calculates the Min K
Spool automatically at initialization.
The printer must be restarted for changes to the Min K Spool menu to take
effect. You can either let the printer restart automatically after you save the
change and exit the configuration menu, or you can wait for the change to
take effect the next time you manually turn on the printer.
Spool Timeout
Sets the number of seconds the interface waits for data from the
host before terminating a spooled print job.
Menu
Administration
Communications
Parallel
Spool Timeout
Choices
00000-99999
00030 (default)
Data Bits
Sets the number of data bits transmitted per character.
Menu
Administration
Communications
Parallel
Data Bits
Choices
7 Bits, 8 Bits (default)