Konica Minolta QMS magicolor CX Reference - Manual (Page 108)

Installing an
Internal IDE Hard
Disk
QMS magicolor CX Reference Guide 2-34
Installing an Internal IDE Hard
Disk
The internal IDE hard disk is identified by the hard disk device num-
ber DSK7.
IDE Hard Disk Assembly Kit
The IDE hard disk assembly kit includes the following:
n
IDE hard disk
n
Plastic ribbon cable
n
4 screws
Installing an Internal IDE Hard Disk
1 Connect one end of the plastic ribbon cable to the hard disk.
Align the colored edge of the cable with pin 1 on the hard disk
connector.
▲ Caution : The plastic ribbon cable is fragile. Handle it gently.
Pin 1