Konica Minolta QMS magicolor CX Reference - Manual (Page 159)

Updated DOC
Commands
3-25 Technical Specifications
Remove Object Command
Example
C—Job 2 %!
%%IncludeFeature:emulation(pcl5) install(6)
%%EndComments
<ESC>(20Xthis text is also in the downloaded font...
Syntax %%IncludeFeature:remove( resource id object id object
type )
Purpose Removes an external object from the printer system.
Variables object type
Purpose Specifies the kind of objects that are to be deleted
from the specified printer system.
Range *, font, macro, pattern, or other object type
Default N/A
Format Character
Notes If object type is * or is not specified, then all objects
on the specified resource with the specified object id
are removed.
object id
Purpose Specifies the ID of the object that is to be removed
from the printer system.
Range *, -1 to 32767
Default -1 (wildcard)
Format Integer