Konica Minolta QMS magicolor CX Reference - Manual (Page 119)

Updating System
Software
2-45 Printer Options
Updating System Software
The system software in your printer is stored on 4 MB of flash mem-
ory. This allows you to update the system software without opening
up the printer and installing new PROMs. Updated system software
allows you to take advantage of future enhancements to the printer.
Updating the system software is a three-step procedure:
1 Choose the appropriate compressed system software files.
2 Install the system software on your computer.
3 Download the system software to the printer.
The following sections explain these steps in detail.
Choosing the Appropriate System Software
Files for Downloading
System software is provided in different formats on both PC and Mac-
intosh disks. The disks you use depend on whether your printer is
functioning (the printer starts up normally, and
IDLE displays in the
message window) or not, the current firmware version, and how you
plan to download the system software to the printer.
Computer Disk Set Hard Disk
Space
Needed
(approx.)
Printer Interfaces for
Downloading
Functional Non-
Functional
Macintosh SYSTEMLOADER 1.75 MB √ √ Serial
SYSTEMDL.PS 3.25 MB √ All
PC SYSTEM.DL 1.75 MB √ √ Parallel,
serial
SYSTEMDL.PS 3.25 MB √ All