Konica Minolta QMS magicolor CX Reference - Manual (Page 81)

6DA 5DAAJ .AA@AH
2-7 Printer Options
4 Snap the plastic brackets onto the appropriate corners of the
sheet feeder.
The inside corner of each bracket is labeled to indicate which cor-
ner of the sheet feeder it fits in. These brackets also have small
rims on the bottom that fit inside the edges of the sheet feeder.
The sheet feeder is now installed. See chapter 2, “Printing,” in the
user’s guide for information on handling media and filling cassettes.
» Note: If you move the printer with the sheet feeder attached, lift the
unit by the four bottom corners, not by the sheet feeder's cassette
slot.
(Top View)
Front
Left
Rear
Left
Front
Right
Rear
Right