AT&T E2728B - Manual (Page 36)

32
Answering System Operation
1. SETUP
3. SETUP
Press until desired feature is
heard (see list at right).
Press until desired selection
is heard.
Press to set selection and
move to next menu option.
Press to set selection and
exit SETUP.
2. CHANGE
(Play/Stop)
1 4
Or
“Announcement. Press PLAY or
press RECORD. To continue setup,
press SETUP.”
Options: [record announcement]
“Remote access code. To change
the setting press CHANGE.”
Options: [enter 2-digit code] 19
“Message alert. To change the set-
ting press CHANGE.”
Options: On / Off
“Announcement only, record no
messages. To change the setting
press CHANGE.”
Options: On / Off
“Base ringer. To change the set-
ting press CHANGE.”
Options: On / Off
“Number of rings. To change the
setting press CHANGE.”
Options: 2 / 4 / 6 /Toll Saver
NOTE: Press and hold
CHANGE
to advance the remote access code
number by 10.
Press REC/MEMO to record your
outgoing announcement (see page 30).
Press STOP to stop recording.
Changing feature options
You can change how the answering system operates.
Press
SETUP
repeatedly to hear each feature. Press
CHANGE
when you hear the feature you want to modify.
Feature options (Default settings underlined).
System announces: Feature description:
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you
have new messages, and after 4 rings if
you have no new messages.
Choose this option to turn the base
ringer on or off (does not affect cordless
handset).
When on, callers hear an announcement
but cannot leave messages (see page 31).
When on, the telephone beeps every 10
seconds when you have new messages.
Enter a two-digit number (10-99) for remote
access from another phone (see page 36).