AT&T E2728B - Manual (Page 37)

33
Answering System Operation
“You have [xx] new
messages and [xx] old
messages”
Number of messages (or, during
playback, message number cur-
rently playing).
14
Message playback begins. See
options at right.
Message playback ends.
NOTE: If “F” is flashing in
the message window, mem-
ory is full. You will have to delete
some messages before new ones
can be recored.
NOTE: New (unheard) messag-
es cannot be deleted.
Press PLAY/STOP to begin or
end message playback.
(Play/Stop)
(Play/Stop)
1 4
Message playback
Press
PLAY/STOP
to hear messages. The system
announces the number of messages, then begins play-
back.
If you have new messages, you will hear only the new
messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear “End of mes-
sages”. If the system has less than 5 minutes of
recording time left, you will hear time remaining.
Options during playback
• Press
VOLUME
button to adjust speaker volume.
• Press
SKIP
to skip to next message (or hold down to
speed up message playback).
• Press
REPEAT
to repeat message currently playing.
Press twice to hear previous message (or hold down
to slow message playback).
• Press
DELETE
to delete message being played back.
• Press
PLAY/STOP
to stop playback.
To delete all messages
To delete all messages, press and hold
DELETE
while
the phone is idle (not during a call, or during message
playback).