Remote access – AT&T E2728B User Manual
Page 40
36
Answering System Operation
NOTE: If you pause for
more than 10 seconds dur-
ing remote access, you will hear a
help menu listing all features &
commands. If you issue no com-
mand for another 20 seconds, the
call will end automatically.
Remote access
A two digit security code is required to access your
answering system from any touch-tone phone. This code
is set at 19 by default; see page 32 to change it.
1.
Dial your telephone number from
any touch-tone phone.
2.
When system answers, enter your
two-digit remote access code (19
unless you have changed it).
3.
Enter remote commands
(see list at right).
4.
Hang up to end call and save all
undeleted messages.
Play all messages
1
Play new messages
2
Delete the message
3
33
Repeat or go back
4
Stop
5
Skip to next message
6
Review announcement
#7
Record announcement
*7
to begin recording
5
to stop recording
Record memo
8
to begin recording
5
to stop recording
Review remote access code
#9
Change remote access code
*9
Help menu
*5
Turn system off
0
Turn system on
0
If off, system will answer after 10 rings.
Enter your access code, then press 0 to
turn on.
Press to turn off answering system.
Incoming calls will no longer be
answered.
Press to hear list of features & com-
mands.
Press * 9 to change remote access
code, then enter desired remote access
code from 10-99.
Press # 9 to review remote access code.
Press 8, wait for beep, then begin speak-
ing. Press 5 to stop recording.
Press * 7, wait for beep, then begin
speaking. Press 5 to stop recording and
listen to playback of new announcement.
Press to review current outgoing
announcement.
Press to stop any operation (stop play-
back, stop recording).
Press to skip current message and
advance to next message.
Press during the caller’s message to
repeat the message. Press during the
beginning of the day and time announce-
ment to go back to the previous mes-
sage.
Press during playback to delete current
message. Press 3 twice to delete all old
messages.
Press to listen to new messages.
Press to listen to all messages..