Alliance Laundry Systems HC35 - Manual (Page 54)

Installation
52
F232062
Steam Requirements
(Steam Heat Option Only)
For machines equipped with optional steam
heat, install piping in accordance with
approved commercial steam practices. Steam
requirements are shown in the table below.
Note: Failure to install the steam filter may
void the warranty.
Cabinet Hardmount
Steam Supply Information
Steam inlet connection size, in (mm) 1/2 (13)
Number of steam inlets 1
Recommended pressure, psi (bar) 30-80 (2.0-5.4)
Maximum pressure, psi (bar) 80 (5.4)
Never touch internal or external steam
pipes, connections, or components. These
surfaces can be extremely hot and will
cause severe burns. The steam must be
turned off and the pipe, connections, and
components allowed to cool before the pipe
can be touched.
SW014
WARNING