Safety, Warning – Alliance Laundry Systems HC35 User Manual

Page 8

Advertising
background image

Safety

6

F232062

To provide personal safety and keep the
machine in proper working order, follow all
maintenance and safety procedures presented
in this manual. If questions regarding safety
arise, contact the factory immediately.

Use factory-authorized spare parts to avoid
safety hazards.

Operator Safety

To ensure the safety of machine operators,
the following maintenance checks must be
performed daily:

1. Prior to operating the machine, verify that

all warning signs are present and legible.
Missing or illegible signs must be replaced
immediately. Make certain that spares are
available.

2. Check door interlock before starting

operation of the machine:

a. Attempt to start the machine with the

door open. The machine should not
start with the door open.

b. Close the door without locking it and

attempt to start the machine. The
machine should not start with the
door unlocked.

c. Close and lock the door and start a

cycle. Attempt to open the door while
the cycle is in progress. The door
should not open.

If the door lock and interlock are
not functioning properly, call a
service technician.

3. Do not attempt to operate the machine

if any of the following conditions
are present:

a. The door does not remain securely

locked during the entire cycle.

b. Excessively high water level is evident.

c. Machine is not connected to a properly

grounded circuit.

Do not bypass any safety devices in
the machine.

NEVER insert hands or objects into basket
until it has completely stopped. Doing so
could result in serious injury.

SW012

WARNING

Never operate the machine with a bypassed
or disconnected balance system. Operating
the machine with severe out-of-balance
loads could result in personal injury and
serious equipment damage.

SW039

WARNING

Advertising
This manual is related to the following products: