Panasonic DMC-FZ200K - Manual (Page 143)

- 143 -
Recording
Applicable modes:
Using this mode, jitter during picture taking is detected, and the camera automatically
compensates for the jitter, enabling jitter-free images to be taken.
When recording motion pictures, “Active Mode” (stabilizer for motion pictures) will automatically
function. This decreases the jitter of the image when recording motion pictures while walking,
etc.
Settings: [ON]/[OFF]
Note
• In “Active Mode”, stronger effect of the correction can be achieved at the wide end.
• In the following case, “Active Mode” will not function even when recording motion pictures.
– When [Rec Mode] is set to [VGA] in [MP4]
– When [Conversion] is set
• The stabilizer function may not be effective in the following cases. Be careful of camera jitter when
you press the shutter button.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
• When [ON] in the Scene Mode [Panning] is selected, the Optical Image Stabilizer is only available
when using in the vertical orientation.
• The setting is fixed to [ON] in the following case.
– [Handheld Night Shot] (Scene Mode)
• The setting is fixed to [OFF] in the following cases.
– [Panorama Shot]/[3D Photo Mode] (Scene Mode)
[Stabilizer]
(DMC-FZ200)
– [High Speed Video] (Creative Video Mode)